The tire is about to fail the five major signs.

Just like you have a sore foot after a hike, the tire will take the pressure from the pavement at every time you drive. Tire wear often does not mean that you have a habit of driving, this phenomenon is the inevitable fact that the normal driving, the tire will gradually wear and aging, and eventually lose grip.
The vehicle if tire failures, the resulting consequences will be catastrophic to lead to losing control of the vehicle, let you stay in the remote region inaccessible, a short period of time is difficult to reach destination. When you clearly understand their own car tire deformation, performance is not the situation, you can change the new tire in time to avoid the occurrence of failure. Here we will give five early warning signs that you have to change the time of the tire.
1 tire tread pattern depth
The thickness of tread pattern must be greater than 1.6 mm, if you often drive on the wet road with low friction, it is best to ensure that the tread pattern thickness is two times of the above values. You can learn to professionals, to buy a meter to measure the thickness of the tread; however old drivers often use a widespread way to roughly estimate the tread thickness, that is to take out a one yuan coin, along the directions of the top coat of arms of insert tread gully, because coin edge to the national emblem of the top of the distance between 1 to 2 mm, so if this can also see the national emblem logo, indicating that tread thickness has been inadequate.
2 tread pattern wear indicator line
The new tire is more than the old one of the old product design: tread pattern wear indicator. The tyres were very new or wear degree is very low, the indication line is hardly to be found, but when wear reaches a certain degree of these hidden in tread gully of the directed line is presented. Tread pattern wear indicator line is flat, and the tread is vertical and vertical to the tread. When you check the tire can occasionally found a to two of the line, the tread pattern thickness has been reduced a lot, in this case on the wet slippery road to be extra careful. If almost all of the tires on the tire are clearly visible, you need to change the tire as soon as possible.
3 tire sidewall cracks
The problems on the tyres are not all focused on the tread, and there will be some problems with the tire sidewall. Look at the cracks and incisions that are visible to the naked eye on the side wall of the tire. These tiny grooves indicate a possible leak of air leakage in the future, and even worse, the failure of the tyres, which we want to avoid. So in the crack of the side wall of the tire looks more serious or with the fastest speed to vehicles bound for plant maintenance replacement tires is the best policy.
4 bumps and blistering on the tire
In some cases, the outer surface of the tire will be due to insufficient strength, resulting in a high out of the surface of the normal tire bulge and blistering. This as vascular aneurysm, tyre is also facing a similar situation, if you fail to promptly sent to the factory repair tire detecting fault for vehicle, tread on low strength area is likely to trigger a sudden burst, high-speed driving tire burst and even lead to ride personnel appear serious injuries.
5 excessive vibration and jitter
A certain amount of jitter is inevitable in the course of the vehicle, especially in the condition of poor road conditions. When you already have a certain driving experience, you can feel your own judgments about how the jitter in a reasonable range, and how the jitter of the vehicle is a failure. There are many reasons for the vibration of the vehicle. It may be that there is a problem of the axial offset of the tire or the force imbalance. But the wobble may also indicate some problems in the interior of the tire; even if the tire is not the basic cause of the vehicle's jitter, the jitter can also impair the performance of the tire. So if there is a more serious jitter to your car, especially good traffic on the road appear jitter, immediately open to vehicle repair factory inspection. Always bear in mind that a greater degree of jitter is often a precursor to vehicle failure.

>> Back